Publicité
Les langues disponibles
Les langues disponibles
B. Setting the cooking end time
By pressing
three times, set the chosen cooking end time using
on the
indicator. When the cooking time ends, the cooking will stop and the intermittent sound signal will be heard. Cancel
it as indicated above.
The programming status can be seen at any time by pressing
sing and resetting the display. Pressing after this will prepare the oven for manual operation.
Note that the oven will continue to work after the end of the cooking process and when the alarm has been stopped. It must be
turned off manually.
Automatic cooking.
+
(Start and end of cooking)
1) Programme the cooking time by pressing
2) Set the end of the cooking time by pressing
3) Select the required temperature and function using the thermostat controls and selector.
After these operations, the
been programmed.
Practical example:
We want to cook for 45 minutes and for the cooking to end at 2 p.m.
• We press
twice and select 0.45 by using
• We press
three times and select 14.00 with
• After these operations, the current time will reappear on the display and the
gramming has been understood and memorised.
• At 1.15 p.m. (2 p.m. less 45 minutes), the oven will start automatically.
• At 2 p.m. the cooking will stop automatically and the intermittent sound signal will be heard.
• We can switch it off by pressing any button.
Note that the oven will continue to work after the end of the cooking process and when the alarm has been stopped. It must be
turned off manually.
Setting the clock
When turning on the oven (and also after any possible power cut) the numbers 12.00 will appear in the panel and the
cator will flash until we enter the right time.
To set the right time, press or
The rate of change will increase considerably a few seconds after the buttons have been depressed.
To change the clock time, we can press
WARNING! any power cut cancels the programmed functions, including the clock. When the power supply
returns, the
indicator will flash and can be reprogrammed
5. After cooking:
• Set the temperature knob (11) to
• Set the cooking mode knob (10) to
Note: The temperature indicator lights up from time to time during use. This indicates the oven is maintaining the set tempera-
ture.
CAUTION! The appliance will not switch off automatically after use. Never leave the appliance unattended
during use.
twice and selecting the required time with
3 times and selecting the required time with
and
indicators will continue to be shown on the display, showing that the oven has
and
.
and
.
to
adjust. There is a 5-second lapse for acceptance during which no button must be touched.
4 times until the
position.
position.
and
. The cooking will start immediately and appear
. The programming can also be cancelled at any time by pres-
and
indicator flashes and set the correct time with
and
.
and
.
indicators will show that our pro-
and
.
indi-
Publicité
