minutes: seconds). At the beginning of the recording, the
operating LED briefly lights up red and then glows green
during the recording.
Press the FILM shutter again to stop filming.
Photos
To take photos, proceed as follows:
Open the LC display flap.
Select the required framing using TELE/WIDE-ANGLE.
If necessary, choose a flash setting by using the flash
button
Press the PHOTO shutter down halfway. A focusing frame
appears.
Focus on your subject and press the PHOTO shutter down
all the way.
To take close-up photos, activate the macro function.
Memory
If a memory card is inserted, your photos will be stored on the
memory card.
If no memory card is inserted, photos will be stored in the
internal memory.
.
9