AL-KO solo CS 4235 Mode D'emploi page 33

Translation of the original instructions for use
TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE
Contents
1 About these operating instructions .......... 34
1.1 Symbols on the title page................... 34
1.2 Legends and signal words ................. 34
2 Product description .................................. 34
2.1 Designated use .................................. 34
2.2 Possible foreseeable misuse ............. 35
2.3 Residual risks..................................... 35
2.4 Safety and protective devices ............ 35
2.4.1 Switch-on protection .................... 35
2.4.2 Chain brake/chain brake bracket. 35
2.4.3 Overload protection ..................... 35
2.5 Symbols on the appliance .................. 35
2.6 Scope of supply.................................. 36
2.7 Product overview (01) ........................ 36
3 Safety instructions ................................... 37
3.1 General Power Tool Safety Warnings 37
3.1.1 Work area safety ......................... 37
3.1.2 Electrical safety ........................... 37
3.1.3 Personal safety............................ 37
3.1.4 Power tool use and care.............. 38
3.1.5 Battery tool use and care............. 38
3.1.6 Service......................................... 38
3.2 Chain saw safety warnings ................ 38
3.3 Causes and operator prevention of
kickback ............................................. 39
3.4 Safety information regarding the re-
chargeable battery ............................. 39
3.5 Safety information regarding the
charging unit....................................... 40
3.6 Safety information when working ....... 41
3.6.1 Operator ...................................... 41
3.6.2 Operating times ........................... 41
3.6.3 Vibration load............................... 41
3.6.4 Noise pollution ............................. 42
3.6.5 Working with the chain saw ......... 42
4 Installation................................................ 43
4.1 Installing the guide rail (02, 03) .......... 43
4.2 Installing the saw chain (02, 03)......... 43
469892_a
4.3 Tightening the saw chain (04, 05) ...... 43
5 Start-up...................................................... 43
5.1 Charging the rechargeable battery
(06, 07) ............................................... 44
5.2 Filling saw chain oil (08) ..................... 44
5.3 Function test of the chain brake ......... 45
5.3.1 Testing the chain brake with mo-
tor switched off (09) ..................... 45
5.3.2 Testing the chain brake with mo-
tor switched on (09) ..................... 45
6 Operation................................................... 45
6.1 Check the saw chain oil ...................... 45
6.2 Putting on the rechargeable battery
belt system (10) to (13)....................... 46
6.3 Inserting/removing the battery (14)..... 46
6.4 Connecting the voltage supply (15, 16) 46
6.5 Switching the motor ON and OFF (17) 46
6.6 Testing the chain brake ...................... 47
6.7 Increase/decrease speed of saw
chain [Eco-Mode/Power-Mode Func-
tion] (18) ............................................. 47
6.8 Checking the charge status of the re-
chargeable battery, "Motion Detec-
tion" (07) ............................................. 47
7 Working behaviour and working tech-
nique.......................................................... 47
7.1 Felling trees (19, 20)........................... 48
7.2 Delimbing (21) .................................... 49
7.3 Cross-cutting (22 - 25) ....................... 49
7.4 Cutting converted timber .................... 50
8 Maintenance and care............................... 50
8.1 Checking the chain tension ................ 50
8.2 Sharpening the saw chain (26) ........... 50
8.3 Cleaning the chain sprocket interior ... 51
8.4 Changing over the quick-tension
chain wheel (27) ................................. 51
8.5 Checking, turning and greasing the
guide rail (28, 29)................................ 51
8.6 Chain maintenance table .................... 51
33