Safety Notes; Important Notes; Functions; Spare Parts - LGB VT 133 Mode D'emploi

Safety Notes

• This locomotive is to be used with the operating system
designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Not for children under the age of 15.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized LGB dealer for repairs or

spare parts.

• http://www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation on LGB two-rail DC
systems with conventional LGB DC train controllers or
power packs (DC, 0 - 24 volts).
• Use a locomotive controller with more than 1 amp of train
current for this model.
8
Preparation
Plug the enclosed cable into the multi-purpose sockets of
railbus and trailer.
Mode of Operation Switch Railbus
This model has a four-way power control switch mounted
under the floor of the railbus (Fig. 1 & 3).
Pos. 0 All power off
Pos. 1 Power to lights
Pos. 2 Power to lights and motor
Pos. 3 Same as 2
Mode of Operation Switch Trailer
This model has a four-way power control switch mounted
under the floor of the railbus (Fig. 2 & 3).
Pos. 0 All power off
Pos. 1 Power to lights
Pos. 2 Same as 1
Pos. 3 Same as 1
Multi-Purpose Socket
The model has "flat" multi-purpose sockets, with removable
covers, on the front and rear walls of both railbus and trailer
(Fig. 4). When you equip a car with interior lighting or with a
sound module, you can connect these circuits to this socket
and provide track power to them. Each of the sockets is
provided with a protective sleeve.