Publicité
1
Installing the spout
Installation du bec
cap
setscrew
vis
spout
top shank
holder
shank
A. First of all, make sure you have three holes in your deck installation AND FOR THE
FUTURE MAINTENANCE, KEEP ALWAYS AN AVAILABLE ACCESS TRAP.
B. Remove the aerator.
C. Remove the cap and unscrew the setscrew and take off the shank. Remove the top
shank holder from the shank body, (Fig.1).
D. From under the deck, insert the shank body through the hole and tighten back firmly
the top shank holder from the top, (Fig.2).
E. Put back the spout and secure it with the setscrew.
last revision: 02/19/2018
aerator
top shank
holder
shank
body
Fig.1
madison 86013
robinet de bain 3 morceaux avec douchette
2
thread rod
cold
water
threaded rod
rubber washer
metal
washer
metal nut
rubber
washer
metal washer
Fig.2
A. Take the mixer and indentify the
connections at the bottom as shown, (Fig.3).
B. At the bottom, connect the hot and
cold water hoses as shown. Next connect
the mixed water hose and the threaded
rod, (Fig.4).
C. Insert the mixer with threaded rod and
the hoses onto the hole of your deck.
Then secure the mixer with tie-down kit
(washer & nut) as shown.
4
3-piece tub filler with handshower
Installing the mixer
Installation du robinet
mixed water
hot water
Fig.3
mixer
mixed water
metal nut
hot
aquabrass.com
cold
Fig.4
Publicité
