Krups XP 1020 Mode D'emploi page 9

notice KRUPS XP1020-0828035.qxd:-0828035
English
MAKING ESPRESSO
Check that the appliance is unplugged and that there is no pressure.
(See CAUTION-PRESSURE)
I
Put the coffee into the filter holder using the measuring spoon. 1 full measuring spoon is the
amount needed for 1 espresso. Using a tamper or the back of the measuring spoon tamp down
the coffee.
I
Remove any excess coffee on the edge of the filter-holder.
8
18/04/08
I
Unscrew the boiler cap. Measure out the right amount of water for your
needs and pour it into the water tank. For instance: an espresso-sized
cup (small cup for strong coffee) = 1 to 2 oz (25 to 50 ml). A standard-
sized cup (for milder coffee) = 3 to 4 oz (75 to 100 ml). Up to 4 espres-
sos or 2 standard cups can be made at one time, without adding addi-
tional water to the tank.
I
Pour the water into the tank.
I
Screw the boiler cap.
I
Plug in the appliance.
I
Fit the filter into the filter-holder and rotate filter inside filter-holder to
secure it.
14:58 Page 8