Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
vent - soft
vent - hard
low capacity heating
high capacity heating
Select the required temperature by means of the temperature selection key: 18°C, 21°C, 24°C, 27°C or 30°C.
This option is only possible when a heating position is selected.
At each press of the selection key, the temperature changes. The selected temperature indicator lights.
The ventilation position at both heating positions is identical, only the heating capacity is increased.
Press the on / off key to switch off the heater. The fan continues for a short period in order to cool down.
Remove the plug from the socket.
SAFEGUARDS
The heater is provided with an overheating protection and an anti-tilting protection.
Overheating protection
When the heater gets too hot due to the ambient temperature or as a result of prolonged use, the heater switches off
automatically. Allow the heater to cool before you switch it on again.
Anti-tilting protection
When the heater falls over accidentally, the protection switches off the entire heater automatically. When the heater is
standing straight again, the heater switches back on.
5
cleaning and maintenance
Before cleaning the heater, switch it off and remove the plug from the socket. Allow the heater to cool down fully before
cleaning or storing it. Regularly clean the heater. At least once per seasonal use.
• Clean the exterior of the appliance with a dry cloth only.
• If necessary, you can clean the protective grille by means of a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the heater in water or any other liquid.
• Store the heater in its original packaging on a cool, dry place.
6
breakdowns and solutions
First check the following if your heater is not working.
• Check the fuses in the meter cupboard.
• Check that the plug is properly inserted in the socket and that the socket receives power.
• Keep the heater clean. Dust, dirt and/or contamination in the heater are common causes of overheating. Make sure that
such contamination is removed regularly.
• If the heater suddenly stops while heating, it is possible that the overheating protection is activated. Switch off the heater,
remove the plug from the socket and allow the heater to cool down. Switch on the heater according to the instructions,
after it has cooled down.
7
technical data
Type number
KVV241B
Voltage
220-240V, 50Hz
Power
maximum continuous consumption: 8.7 Ampere
Capacity
LOW = 1200 watts, HIGH = 2000 watts
14
•
English
Publicité
Table des Matières
