Transportation And Storage; Cleaning And Maintenance; Disposal; Installation (Part B) - Atera Genio PRO Instructions De Montage

TRANSPORTATION AND
STORAGE
The rear carrier system / accessories must
be stored in a dry, clean and frost-free lo-
cation .
CLEANING AND
MAINTENANCE
The rear carrier system / accessories
Z
must be cleaned with warm water and
soap / car shampoo at regular intervals,
and always after exposure to salt water.
Re-grease moving metal parts (e.g. locks)
Z
at regular intervals.
Remove the rear carrier system / acces-
Z
sories before using a car wash.

DISPOSAL

All components of the rear carrier system /
accessories are fully recyclable and can be
handed over to an appropriate collection
point for recycling.
Lights / lamps must be properly disposed
Z
of as electrical scrap.

INSTALLATION (PART B)

See installation manual (part B)
Z

SYMBOLS USED

Action step complete
Attention / Warning
Correct
Use force
Al
Do not use aluminium
Aluminium
Do not use oil / grease
Closed
Open
Visual inspection
Please note: Correct engaging
with clicking noise
Scope of delivery
Accessories
Spare parts
i
Information
Marking:
Part A: User information
A
Part B: Installation manual
EN
10