Publicité
Les langues disponibles
Les langues disponibles
USAGE
PlAYING dvd/vCd/Cd
GENERAl INsTRuCTIONs
Insert a DVD/VCD/CD in the disk compartment. Close the
compartment: the player automatically starts reading the
disk.
There are DVD's with menus : the device will display the
titles menu automatically. Press mENu to return to the titles
menu, or press DVD Menu to return to the main menu.
Press Zoom to zoom 4X in all video support (DVD/VCD).
When you display a CD, press REPEAT to select 2 different
modes: Track/All.
PlAYING mPEG4/mP3/JPEG FIlEs
[ - ] FILE 06.JPG
A thumbnail of the image is displayed on the left side of the
window when a JPEG file is selected.
SETUP
SEARCH
Press OK to select a JPEG image on the TV screen, use the
navigation buttons to turn the image at your convenience.
To display an MP3 file, select a track with navigation
buttons, then press OK or PlAY to confirm.
EN
22
01 - FILE 01
02 - FILE 02
03 - FILE 03
04 - FILE 04
05 - FILE 05
06 - FILE 06
07 - FILE 07
SOURCE
ENTER
PROLOGIC II
HOME THEATER
HT100SB
PlAYING A RECORdEd Cd FIlEs
[ - ] TRACK 04.MP3
01 - .
The device can display recorded MPEG4, MPEG1/2, MP3,
WMA or JPEG files.
Compatible formats: CD-R, CD-RW, DVD-R, DVD-RW,
DVD+R, DVD+RW.
There isn't any limitation in the files number: the folders
are identified. A folder can store 999 different files. For
example: from 5 to 7 films in a DVD+R, or 100-200 MP3
tracks in a CD-R. Different types of files can be stored on
the same disk : for example, JPEG, MP3, WMA and MPEG4
files.
Formats extension compatibles: *.wma, *.avi, *.mpg,
*.mp3, *.jpg. The device can't display files with different
extensions.
RAdIO
manual setting
• Connect the FM antenna to the back of the device.
• Press sOuRCE to select radio.
• Press sCART/Fm in the remote control or sOuRCE in
the front panel to pass to the TuNER mode.
• Select a radio station and press TuNE-/TuNE+ to
search for the desired station.
• Press for one second to start the automated search.
Radio station storage.
The device can store 30 radio stations. You can enter the
radio station or the device can store all the radio stations
automatically in an ascending order.
default Automatic Programming.
• Press sCART/Fm to pass in TuNER mode.
• Press TuNE-/TuNE+ for two seconds to start the
automatic research.
• The device scan the radio frequency and automatically
store the radio stations. When all the available radio
stations are stored or the 30 memory sites are full, the
automatic programming stops.
manual selection
• Select a radio station (see « Manual settings» for more
information).
• While the number of the programme twinkles, you
should enter the desired selection number with the
numerical keypad, then press mEmORY to the storage.
station recovery
• Press sCART/Fm to enter in TuNERmode.
• Press PREv/PREsET/PREsET/NEXT to search the
stations or press the numerical keys directly.
01 - TRACK 01
02 - TRACK 02
03 - TRACK 03
04 - TRACK 04
05 - TRACK 05
06 - TRACK 06
07 - TRACK 07
Publicité
