Setting Up The Display Options - Samsung DVD-E137A Mode D'emploi

Setting Up the Display Options

1
With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons,
then RIGHT or ENTER button.
3
Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4 Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
TV Aspect
Still Mode
Screen Messages
Front Display
Black Level
NTSC Disc Output
SCART Output
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
46
DISPLAY SETUP
TV Aspect : 4:3 L-Box
Still Mode : Auto
Screen Massages : On
Front Display : Auto Dim
Black Level : Off
NTSC Disc Output : PAL 60 Hz
SCART Output : RGB
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
ENG
Setting Up the Display Options
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen. Black bars will appear at the top
and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit's front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
"NTSC" if the screen only has one NTSC-video entrance. If this is not the case,
you can choose to leave " PAL 60Hz" as is.
SCART Output
1. RGB : Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video : Sends S-VIDEO signal from the AV JACK(SCART terminal).
3. Video : Sends COMPOSITE VIDEO signal from the AV JACK(SCART terminal).
ENG
47