Broan Best IEX42 Mode D'emploi page 9

MOUNT HOOD TO SUPPORT
FRAME
1. Before mount hood to support frame remove
the electrical box.
2. Mount hood to support frame.
3. Insert four (4) bolts through the top of the
hood - from the inside.
4. Use four (4) nuts and four (4) washers
(Ø6,4mm) to secure hood to support frame
as shown.
5. Replace electrical box.
ELECTRICAL BOX
USE (4) NUTS AND (4) WASHERS
- 9 -
WASHER
(D.6.4MM)
NUT
BOLT