Hama High-End Mode D'emploi page 27

Specifications:
Display: 8.0 TFT LCD display; 800 x 600 pixels
Version: HA07V1.5-102
USB port: USB 2.0 high speed
Storage media for: CF/SD/SDHC/MMC/MS
Image format: JPEG, JPG, BMP, PNG, GIF
Film format: Motion JPEG, MPEG 1/2, MPEG 4, DivX,
Xvid, Avi
Outputs: USB connection (host & device)
Power supply: AC/DC Adapter (12 V, 1.5 A)
Operating temperature: 0°C ~ 30°C (32°F ~ 85°F)
Dimensions: approx. 25,0 x 3,0 x 20,5 cm (W x D x H)
Space requirements: approx. 25,0 x 17,5 x 20,5 cm
(W x D x H)
Relative humidity: 40–64 % RH (non-condensing)
WARNING:
So-called pixel errors can occur depending on the
manufacturing process. These manifest themselves as
white or black pixels that permanently light up during
display. Within the context of production tolerances, a
max. 0.01% of these pixel errors measured on the total
size of the screen are permitted as a tolerance and do
not represent a product fault.
Support and contact information
If the product is defective:
Contact your retailer or Hama Product Consulting if you
have any product claims.
Internet/World Wide Web
Product support, new drivers and product information
are available at www.hama.com.
Safety notes
Observe the following safety instructions to ensure safe
handling of the device:
• Visually inspect the device before using it to make
sure that there is no external damage. Do not operate
the device if it is damaged.
• Only have the device repaired by specialists. Improper
repair work invalidates any warranty claims.
• Faulty components may be replaced with original
spare parts only. Only original spare parts can
guarantee that applicable safety requirements are
adhered to.
• Disconnect the power supply adapter before cleaning
the device, during thunderstorms, and in the event of
malfunctions.
• Keep the device away from moisture and protect it
from being penetrated by liquids or objects.
• Disconnect the power supply adapter immediately if
the device comes into contact with liquids.
• Do not place any objects on top of the device.
• Place the device on a flat, level surface.
• Do not place the device in a hot, wet, or very humid
environment.
• The device requires adequate air circulation in order
to function properly. During operation, do not place
the device on soft surfaces, carpets, or other
materials that might block air circulation.
• The socket must be easily accessible so that it is easy
to disconnect the power supply adapter in case of an
emergency.
1177
27