SIOUX ID375AP Serie Instructions page 3

LUBRICATION
For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is
recommended.
If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and
run the tool for 10-20 seconds to distribute oil through the tool.
Lubricate the gears through the grease fitting with Sioux 1232A grease after 100 hours of operation.
MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil
and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.
Catalog Noise* (Tested in accordance with ISO Standard 15744)
Number
*Sound Pressure (dBA)
ID375AP-2Q 94.7
IW375AP-3P 98.0
IW375AP-3F 98.0
ZCE813
WARNING
Disconnect tool from air supply before performing any adjustment, maintenance, or repair.
NOISE AND VIBRATION READINGS
*Sound Power (dBA)
106.3
109.6
109.6
Vibration* (Tested in accordance with
Uncertainty (dBA) *Vibration m/s^2
3.0
3.0
3.0
3
ISO Standard 28927-1:2009)
Uncertainty m/s^2
5.42 0.26
6.73 0.53
6.73 0.53
Date 2012May1/A