Fein CCG18-115 BL Mode D'emploi page 17

OBJ_BUCH-0000000284-001.book Page 17 Tuesday, November 21, 2017 12:14 PM
en
17
Mounting the auxiliary handle
Fig. 4
(figure 4).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
1.
2.
Auxiliary handle
Mounting the wheel guard (figure 5).
Fig. 5
Insert the wheel guard ensuring that the cams
Wheel guard
of the opening engage in the grooves on the
power tool.
Press the clamping lever and turn the wheel
guard to the required working position. 3.
Allow the clamping lever to engage.
1.
2.