Publicité
Les langues disponibles
Les langues disponibles
Vaporisator 04/10 Seite 9 Freitag, 30. Juli 2010 11:07 11
•
When the steriliser is in operation the
surface can become very hot, so only touch
the unit on the handle or the switches.
•
After sterilisation, carefully remove the
feeding bottles with the bottle tongs
provided, as the bottles will be very hot.
•
Food prepared in the steam steriliser should
be used immediately, and should not be kept
warm for a prolonged period. The food
should also not be reheated.
•
To avoid the risk of scalding, please carefully
check the temperature of the food first
before feeding it to your baby.
3. Sterilising baby feeding bottles, teats and accessories
3.1 General sterilising information
Newborn babies initially do not have an ade-
quate resistance to protect them against patho-
genic germs which may cause illness.
This means that when you prepare infant feeds
it is vital that the bottles, teats, etc. are properly
sterilised so they are germ free.
Even tiny feed residues left on teats and bottles
can easily lead to bacteria forming.
The steam steriliser works by the heat-sterilisa-
tion method where water is heated to 95 -
97 °C and the steam generated then rapidly
sterilises the items.
The small quantity of water the steam steriliser
uses for sterilising means that very little energy
is required.
3.2 Sterilisation
Please note:
all parts which are to be sterilised
must first be thoroughly washed and rinsed to
remove all visible feed residues.
Figures
to
relating to sterilising can be found
A
I
on the inside cover of the fold-out page.
1. Press in three of the four locks
of the basket
. The drip tray
7
•
After use, disconnect from the power
supply immediately, to avoid the steam
steriliser being turned on accidentally.
•
Before each use, carefully check the power
supply cable for damage. Do not use the
steam steriliser if the power supply cable is
damaged in any way.
•
The steam steriliser should only be
dismantled by an approved agent otherwise
the guarantee becomes invalid.
•
Repairs should only be carried out by an
approved agent. Repairs carried out by a
non approved agent cannot be guaranteed
and could cause a safety hazard.
put away as this is only used when steaming
food (Fig.
2. Place the bottle holder
the basket
3. Place the caps which have been stacked
together with the opening facing down in a
ring in the bottle holder (Fig.
4. Insert the baby feeding bottles upside down into
the vacant rings in the bottom basket (Fig.
5. Fit the top basket
bottom basket (Fig.
6. Place the teats and the baby feeding bottle
accessories in the top basket (Fig.
7. Add 90 ml of tapwater to the evaporation
tray
10
8. Place the filled basket in the unit so that the
engraving is pointing towards the switch at
the front (Fig.
Please note:
positioned the lid may not fit correctly and
steam and water may escape from the unit.
9. Place the lid
into the socket and switch on the unit using
8
on the base
the On switch
can now be
9
lamp
11
9
A
).
5
in the bottom of
(Fig.
).
7
B
C
).
onto the handle of the
4
).
E
F
).
(Fig.
).
G
H
).
if the basket is not correctly
on the unit, insert the plug
2
(marked). The indicator
12
will light up (Fig. I).
).
D
14
Publicité
