eTIGER Secual Box V2 Mode D'emploi page 5

SIM
Turn the control panel on
-
Plug the power adapter to an AC socket.
-
Plug the output connector of the power adapter into the adapter input on
the side of your control panel.
-
Push the power switch.
-
Place your system where you have a good reception (Wi-Fi and/or GSM)
LED INDICATIONS
TOP : Blinking slowly = connected to GSM signal | Blinking
-
rapidly = Searching for GSM signal
- BOTTOM : Green fixed = powered and on | Blue = WI-Fi
connected
2
Power adapter input
Power switch
EN