STARFRIT THE ROCK Instructions Pour L'usage Et L'entretien page 9

3. Ensure the silicone cover is securely inserted in each reversible heating plate.
4. Insert the power plug into the power outlet, the white power light will illuminate.
5. Turn the temperature control dial to the desired temperature, allow the panini grill
to preheat until the green ready light illuminates.
NOTE: When the thermostat has reached the operating temperature, a green
indicator light will illuminate to indicate that the appliance is ready for cooking.
The green (READY) light may turn on and off during cooking. This is normal and
indicates that the thermostat is maintaining the proper cooking temperature to
grill to perfection.
WARNING: The cooking plates and metal surfaces of the unit will become
extremely hot when in use. To avoid a burn hazard, wear heat resistant mitts or
gloves and touch only the black portion of the handle.
6. Apply oil or butter to the cooking surface and begin grilling the food.
7. Use wooden or plastic heat-resistant utensils to handle food.
WARNING: Do not use metal utensils on this product, as they will scratch and
damage the plates' non-stick coating.
NOTES:
• The cooking time for different foods depends on the type and thickness of
the foods.
• Foods should be cooked thoroughly before consumption.
• Do not cook or defrost frozen food. All food must be completely defrosted
before cooking it with this product.
8. When the food is cooked as desired, use appropriate utensils to remove the food.
9. Turn temperature control dial to "Min" and unplug the power cord from the
electrical outlet. Pull directly on the plug—do not pull on the power cord.
10. When the unit has completely cooled, remove the drip tray located in the middle
of the appliance from the front. Wash in hot, soapy water and dry thoroughly.
NOTE: The drip tray is not dishwasher safe, hand wash only.
CLEANING AND CARE
1. Before cleaning, unplug and wait for the appliance and the plates to cool down.
2. Wipe the outside with a slightly moistened cloth only, ensuring that no moisture,
oil or grease enters the cooling slots.
3. To clean the plates, remove them (by pressing on plate release buttons - Fig.1)
and remove the silicone covers at the same time. Wash the plates and the silicone
covers under running water or in a dishwasher. Dry them afterwards.
4. Ensure the silicone covers are securely replaced on each reversible heating plates
before storage.
5. Do not clean the inside or outside with any abrasive scouring pad or steel wool as
this will damage the finish.
6. Do not immerse in water or any other liquid.
Fig.1
9