Publicité
Les langues disponibles
Les langues disponibles
EN
Do not simultaneously use the blade (9 or 9a) and the disc
(11 or 6).
•
Put the items in the container (7), position and close the cover (12) by turning it
clockwise until it clicks shut.
The appliance doesn't start if the safety cover (6) and the container (7)
are not hooked correctly.
•
Connect the power plug to the outlet making sure that the mains voltage corre-
sponds to the one indicated on the appliance data plate.
•
Start the appliance by turning the starting switch (16) on the desired speed.
During the foods processing pay attention not to fill the container (7) over
the maximum capacity of 3000 ml (indicated on the container itself).
If you notice that the motor shows difficulties in the rotation turn off
the appliance and check that there are not obstacles to it or that you've
not exceeded with the quantity of foods to process.
•
The addition of possible ingredients must be performed from the duct on the cover
(12) removing the tamper (13).
If you remove the container (7) from the motor base (1), the appliance
stops (the safety switch intervenes).
•
To stop the appliance move the switch (16) back on "0".
Before removing the cover (12) from the container (7), or the
container from the motor base (1), always move the switch (16)
on "0" and wait for the blades to stop.
•
To remove food residues from the container sides (7) or to reprocess the foods them-
selves ....
.... move the start switch back on "0"
.... wait for the blades to stop
.... use appropriate tools ONLY.
76
USE AS ROBOT
SMX 6208
Publicité
