RBT 3618
Before positioning or removing the cup (2), container (7) or the coffee grinder
☞
(2a) from the motor base (1) make sure that the switch (16) is set to "0".
☞ ☞
During functioning, the power outlet must be easily accessible if its necessary
to disconnect the appliance. Do not place the appliance under a power outlet.
• Do not move the appliance while it's working.
• The appliance has not been designed to be used under rain and it must not be stored
outside or in moist places.
☞
Never submerge the motor base (1) in water or other liquids.
Do not damage the blades (3, 9, 11a, 11b, 11c) while blending or processing hard
(coffee, shells, bones, ice, etc.) or frozen foods.
• Do not try to sharp the blades, change the whole group if necessary.
The blades (3, 9, 11a, 11b, 11c) are very sharp; handle them carefully.
☞ ☞
Do not use the cup (2), container (7), bowl (18) or channel (32) in a traditional
or microwave oven.
• The appliance is equipped with safety switches that don't allow to start the appliance
if its components are not correctly placed.
Do not let the appliance work manipulating the safety switches.
The appliance is prepared for the functioning of only one unit at a time (as blender
or as robot/as slicer or as mixer). Do not use two or more units at the same time.
☞
Do not use the appliance in environments with explosives, combustible gasses
or inflammable liquids (varnishes, glues, spray cans, etc.).
EXPLOSION AND FIRE DANGER.
• When you're finished using the appliance always turn it off and disconnect it from the
power outlet.
GENERAL WARNINGS
EN
65