Ramiaudio AUF300 Manuel Utilisateur page 24

FRONT PANEL
IN/OUT CONTROL
21 - Bargraph mode selection:
- Release for RMS reading.
- Press for PEAK reading
22 - Stereo Bargraph (ten points):
-12dB; -9dB; -6dB; -3dB; 0dB; +3dB; +6dB; +9dB; +12dB; +15dB.
23 - Stereo Headphones socket for monitoring (25 to 600 ohms). Same signal as displayed on
bargraph
Note :
Displayed levels are relative levels. The 0 dB reference level can be set by internal switch at 0
dBu or +6dBu which is the most frequently used level in professional audio equipment. Input
or output levels are considered as +6 dBu.
(Contact us for +4 dBu and +12 dBu levels).
RAmi
21
OFF
OFF
22
+6dBU
OFF
0dBU
24
23
+6dBU
OFF
0dBU
Next
AUF 300