Troubleshooting; Specifications - Royal Sovereign RTHD-790S Guide D'utilisation

TROUBLESHOOTING

Problem Reason
Hand Dryer is not
• Temperature option set to
warm
• Defective heating element
Hand Dryer does
• No Power to the Unit.
not start
• Defective Sensor
• Defective Sensor
Hand Dryer does
• Sensor is dirty
not stop
• There is a reflection

SPECIFICATIONS

MODEL
Voltage/Frequency
IP Rating
Motor Rate/Type
Power Switch
Heat Setting
Dimensions (WxDxH)
Weight
COOL
under the sensor
Solution
• Modify temperature switch to WARM
(see page 3)
• Call Royal Sovereign customer service fora
replacement heating element.
• Check that unit is plugged in and power switch is
set to the ON position (see page 3)
• Call Royal Sovereign customer service for
replacement sensor and/or replacement motor.
• Clean the sensor with a soft cloth (see page5).
• Remove or block reflection that is causingthe
sensor to activate
• Check that the non-reflective base pad has not
been damaged.
RTHD-790S
120V, 60HZ
IP24
20,000 RPM Brush Motor
ON/OFF
WARM/COOL
25 x 21 x38 cm
2.0 kg
6