INSTALLATION OPTIONS
Table-top: Place unit on a level, flat surface and plug into a wall outlet.
Wall-mount:
1.
Select the ideal mounting location based on power source and
height of users.
2.
Drill two level holes 106mm with the expansion screwsextending
6mm (see image below).
3.
Remove main unit from base by rotating the unit clockwise; hand
on expansion screws.
4.
Turn select temperature option (WARM/COOL) and turn power
selector "ON".
5.
Store removed base in safe place for future usage option.
MAINTENANCE OF MACHINE
WARNING: Before cleaning, turn the power switch off and disconnectthe
power cord from the wall.
Clean the housing with a soft cloth. Do not use abrasive cleaning materials,
as it may scratch the unit. Use of alcohol based cleaning products shouldbe
avoided; this will negatively affect the non-reflective base pad. Do not spray
cleaning liquids or water directly into the hand dryer.
5