Publicité
Les langues disponibles
Les langues disponibles
7. DESCALING PROCEDURE
This process should be made every 6 months
or as soon as you feel that the performance of
the appliance (steam output) is decreasing.
1. Remove the steam head from the hanger, unlock the locker and pull
out the pole.
2. Never fill inside the pole connection ( G1 / H).
3. Remove the water tank and open its cap.
4. Fill the water tank with a mixed preparation of 50% vinegar and
50% water of vinegar and 500ml of water. Close the cap.
5. Descale the appliance by placing the water tank with the mixture of
vinegar / water (cold appliance), back into the base.
6. Gently shake the appliance.
7. Leave to soak for at least 5 minutes.
8. Remove the water tank from the base.
9. Vertically tilt the appliance to empty the water into the sink.
10. Repeat the procedure until there is no more water in the water tank
(5-6 times).
11. Once completed, re-assemble the product ( Step 1 to 7).
12. Remove the cap then fill the water tank with 44oz of water.
13. Re-assemble the water tank cap by screwing it in completely to ensure
that it is watertight but do not over tighten it and insert the water
tank back into the appliance.
14. Plug in the appliance.
15. Let the appliance run until the water tank has completely emptied.
WARNING! Wait an hour so that the
appliance has completely cooled
down.
EN
27
Publicité
