been activated.
•
Press <AOT> again the change the current setting down to the nearest multiple of 5 minutes
within 120-5 min.
•
Press <AOT> when the current setting is 5 min, 'OFF' goes solid which implies the sleep is
cancel, and radio will be keep ON
2.13 Radio Power On/Off
•
Press <On/Off> once, power on the radio and the station frequency show on LCD.
•
Press <On/Off> again, power off the radio and return to Auto Run Mode
2.14 Radio reception
•
Press <On/Off> once, the station frequency show on LCD.
•
Press <Up> once to change the receiving frequency up by 1 step.
•
Press <Down> once to change the receiving frequency down by 1 step.
•
Press and hold <Up> to search the next radio station by moving the receiving frequency up.
•
Press and hold <Down> to search the next radio station by moving the receiving frequency
.
down
2.15 Recall radio preset memory
•
There are 30 preset memory stations for the radio
•
When the radio is ON, press <Preset +> or <Preset -> to select the memory. 'MEM' goes solid;
the frequency of the memory goes solid in the LCD.
•
When new preset memory is selected, MUTE is active. When keying the preset memory has
been released for 1 second, the selection of preset memory is considered as valid and the radio
will be tuned to that frequency immediately with MUTE idle.
•
At any time, press other key to start its corresponding function.
2.16 Store into memory
•
There are 30 preset memory stations for the radio
•
Press <Memory> once, the 'MEM' goes flash. Press < Preset +> or <Preset -> to select the
desired preset memory station, press <Memory> again to store the frequency.
•
When new preset memory key is pressed, MUTE is active. When keying the preset memory has
been released for 1 second, the selection of preset memory is considered as valid and the radio
will be tuned to that frequency immediately with MUTE idle.
•
At any time, press other key to start its corresponding function.
2.17 AMS Using
When radio is On.
•
Press and hold <AMS> for 2 seconds to active AMS mode.
ENGLISH
GB 6
.