Options | Advanced - Optoma W351 Mode D'emploi

When Power mode

(Standby) is set to
Eco (<0.5W), the
VGA output and
Audio pass-through
will be deactivated
when the projector is
in standby.
The value of sleep

timer will be reset to
zero after the projec-
tor power off.
OPTIONS |
Advanced
Direct Power On
Choose "On" to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the " " key on the projector control panel or on the
remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Quick Resume
On: If the projector is accidentally turned off, this feature allows

the projector to be instantly powered on again, if selected
within a period of 100 seconds.
Off: The fan will start cooling the system immediately when user

turns off the projector.
Power Mode (Standby)
Eco.: Choose "Eco." to save power dissipation further < 0.5W.

Active: Choose "Active" to return to normal standby and the

VGA out port will be enabled.
User Controls
51
English