Optoma W351 Mode D'emploi page 30

User Controls
Main Menu
SETUP
OPTIONS
30
English
Sub Menu
Projector ID
Audio Settings Internal Speaker
Mute
Volume
Audio Input
Audio Input 2 function
Network Status
LAN Settings
DHCP
IP Address
Subnet mask
Gateway
DNS
Apply
MAC Address
Exit
Advanced Logo
Closed Captioning
Exit
Input Source
Source Lock
High Altitude
Information Hide
Keypad Lock
Test Pattern
IR Function
#6
Background Color
Remote Settings User 1
User 2
User 3
Advanced Direct Power On
Auto Power Off (min)
Quick Resume
Sleep Timer (min)
Power Mode (Standby)
Lamp Settings Lamp Hours
Lamp Reminder
Brightness Mode
Lamp Reset
Exit
Optional Filter Settings Optional Filter Installed
Filter Usage Hours
Filter Reminder
Filter Reset
Exit
Reset
Please note that the on-screen display (OSD) menus vary according to the

signal type selected and the projector model you are using.
( ) "Color" and "Tint" are only supported in Video mode.

#1
( ) "Signal" is only supported in Analog VGA (RGB) signal.

#2
( ) For XGA model only.

#3
( ) For WXGA model only. 16:9 or 16:10 depend on "Screen Type" setting.

#4
( ) "3D Sync Invert" is only available when 3D is enabled and this mode

#5
3D is for DLP link glass only.
( ) The function depends on model's specifications.

#6
Settings
0~99
On / Off
On / Off
0~10
Default / AUDIO1 / AUDIO2
Mic / Audio Input2
Connect/Disconnect(Read-Only)
On/Off [Default Off]
Default [192.168.0.100]
Default [255.255.255.0]
Default [192.168.0.254]
Default [192.168.0.51]
Yes / No
Read-Only
Default / Neutral
Off / CC1 / CC2
VGA / Video / Video / S-Video / HDMI
On / Off
On / Off
On / Off
On / Off
None / Grid / White Pattern
On / Off / Top / Front
Black / Red / Blue / Green / White
VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
VGA2/S-Video/LAN/Brightness/Contrast/Sleep Timer
On / Off
0~180
On / Off
0~990
Active / Eco.
On / Off
Bright / Eco. / Dynamic / Eco+
Yes / No
Yes / No
0~9999
Off / 300hr / 500hr / 800hr / 1000hr
Yes / No
Yes / No