Storing unsuitable containers
Storing media which can react with one another above the same spill sump
Exceeding the maximum storage quantity and load capacity
Transporting the product when it is loaded
Using the spill sump on a tilted or angled surface
Intentionally filling the spill sump
Putting objects on the visual leak indicator
2.2
Operator obligations
Before commissioning
The product must be clearly marked for the intended storage purpose. Check the product
for damage.
Permanent obligations
The following are permanent obligations for you as the operator:
You must implement national regulations for health and safety, accident prevention
and environmental protection.
You must implement all other national rules and regulations.
You must carry out a risk assessment.
You must prevent misuse.
Anyone who works with the product must use suitable protective equipment.
Anyone who works with the product must be qualified for their area of
responsibility.
274227_pro-line FK
10 / 20
Auffangwannen_Operating-instr_001_en.docx
Safety instructions