E
Troubleshooting
N
G
L
I
S
SD card
H
Problem
Possible cause
33
Some fi les are not compatible with
The fi le recorded on
this unit and cannot be played
SD is not displayed.
back.
Picture distorted.
Picture quality may worsen or
some frames may be skipped when
viewing MPEG4, but this is normal.
Distorted sound.
There may be some noise output
when playing MPEG4 and VOICE
fi les, but this is normal.
The display does not
"DISPLAY" setting on the VOICE
appear.
mode screen is set to "OFF".
VCR, Camcorder, etc.
Problem
Possible cause
The picture from a
A VCR or Camcorder is not
VCR or a camcorder is
connected correctly.
not displayed.
Display settings
Problem
Possible cause
The picture is dark.
The screen is not adjusted
The picture is whitish.
properly.
Something is wrong
with the picture.
The picture is light in
color.
Red, blue, or green
This is a characteristic of liquid
spots appears.
crystal panels.
76
CY-VH9300U
(continued)
Possible solution (reference page)
Check the recorded fi le. (page 58)
This is not a problem.
This is not a problem.
Set "DISPLAY" setting to "ON".
(page 67)
Possible solution (reference page)
Connect a VCR or Camcorder correctly.
(page 37 of Installation Instructions)
Possible solution (reference page)
Make every adjustment of the screen.
(page 68)
This is not a problem. (page 11)
Remote Control Unit
Problem
Possible cause
No response to
The battery is inserted in the
pressing buttons
wrong direction. A wrong battery is
inserted.
The lithium battery is weak.
The aiming direction of the remote
control unit is wrong.
The sensor is exposed to direct
sunlight. (The remote control
unit may not be operable when
the sensor is exposed to direct
sunlight. In such a case, the
system is not faulty.)
E
N
G
L
I
S
H
Possible solution (reference page)
34
Insert a correct battery in the correct
direction. (page 51)
Replace the battery with new one.
(page 51)
Aim the remote control unit at the
sensor of the unit and press buttons.
(page 47)
Block off sunlight to the sensor.
(page 7)
77
CY-VH9300U