Odys SLIM DV SDV i5 Mode D'emploi page 24

Flicker Settings
Area
Setting
Area
Setting
Note: The flicker setting is based on the frequency standard of your local power supply.
System Message
Message
Recording
Please Unlock SD Card
No File
Please Change Battery
Memory Full
Card Error
Memory Error
Strobe Is Charging
File Format Error
Deleting
Formatting
Setting
12
Appendix: A
England Germany
50Hz 50Hz
Portugal America
50Hz 60Hz
The camcorder is recording a file.
If you insert a SD card and the card is set to "Protected", this message will
show up when the camcorder tries to write data into the card.
When the camcorder is set to Playback mode without any existing file to
play, this message will show up.
The battery life of the camcorder is low. You should replace the battery with
a new one immediately.
The storage memory is full and can not store any more files. Please change
the SD/MMC card or delete some files to free some memory space.
The inserted card is not compatible with the camcorder. Please change the
card or try formatting the card.
The camcorder can not access data in the internal memory.
Please format the medium to solve this problem.
The flash strobe is charging.
The file being played is not compatible with the camcorder.
The camcorder is performing file deletion.
The camcorder is formatting the storage medium.
The camcorder is performing a setting action.
France Italy
50Hz 50Hz
Taiwan China
60Hz 50Hz
Description
Spain Russia
50Hz 50Hz
Japan Korea
50/60Hz 60Hz