Odys SLIM DV SDV i5 Mode D'emploi page 15

Connecting the camcorder to your PC
1. Turn on the camcorder.
2. Connect the USB cable to your computer.
Turn on your computer, and then connect the
accessory USB cable to the USB port of your
computer. Make sure the cable and the port are
correctly aligned.
3. Connect the USB cable to your camcorder.
Connect the other end of the USB cable to your camcorder.
The default is set to "Disk" mode, if you would likt to set other modes
as default, please refer to "USB Mode" section for more information.
USB mode:
Power-on → Press the Mode button → Enter the Setting (
USB Mode
Notice for Windows 2000/XP users:
If you want to disconnect the camcorder from your computer, please follow these steps:
1. Double-click
2. Click (USB Disk), and then click Stop.
3. Select the camcorder when the confirmation screen appears and click OK.
4. Follow the on-screen instructions to safely disconnect the camcorder from your
computer.
When connected to a PC, the camcorder displays a
Menu
menu for you to choose a desired connection mode.
When connected to a PC, the camcorder automatically
Camera
enters Camera (PC camera) mode.
When connected to a PC, the camcorder automatically
Disk
enters Disk (removable disk) mode.
in the system tray.
) mode.
3