Axis P3364-LVE Guide D'installation page 13

10 SD memory card slot
11 Mounting bracket
12 Unit casing
13 Spring
14 Fan output connector
15 Dome cover
16 Bottom holes
17 Side holes
Mounting Bracket
The mounting bracket has 4 mounting patterns (A, B, C, D).
The mounting patterns follow the standard for the following mounting options:
• A: 4 inch square box
• B: standard-sized US double gang junction box
• C: 4 inch octagon box
• D: standard-sized US single gang junction box
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
AXIS P3364-LVE Network Camera
13
EN