Bosch BGS4 Serie Mode D'emploi page 45

en
Congratulations on your purchase of the Bosch Runn`n
vacuum cleaner.
This instruction manual describes various Runn`n mo-
dels, meaning that some of the equipment features
and functions described may not be available on your
model. You should only use original Bosch accessories,
which have been specially developed for your vacuum
cleaner, in order to achieve the best possible vacu-
uming results.
Please keep this instruction manual for future refe-
rence. When passing the vacuum cleaner on to a third
party, also pass on this instruction manual.
Fold out the picture pages.
Your vacuum cleaner
1 Adjustable floor tool* (For the same functions, the
appearance of the nozzle may differ from the picture)
2 Telescopic tube with sliding switch but without acces-
sory connection*
3 Telescopic tube with adjusting sleeve and accessory
connection*
4 Flexible hose
5 Handle
6 Foam filter
7 Parking aid on the back of the appliance
8 Exhaust filter lid
9 Power cord
10 Appliance lid
11 Foam filter lid
12 Carrying handle
13 On/off button with electronic suction regulator
14 Filter control display (Sensor Control)
15 Dust container with carrying handle
16 Storage aid on the underside of the appliance
17 Fluff filter cover
18 Multi-purpose nozzle*
19 Accessories holder for multi-purpose nozzle*
20 Professional upholstery nozzle*
21 Professional crevice nozzle*
22 Upholstery nozzle
23 Accessories holder*
24 Crevice nozzle
25 Brush ring (for fitting on the upholstery nozzle)*
26 Drill dust nozzle*
27 Hard furnishings brush*
28 Hard-floor nozzle*
29 Hard-floor nozzle*
Replacement parts and special accesso-
ries
A Hard-floor nozzle BBZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
B Hard-floor nozzle BBZ124HD
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
Before using your appliance for the first
time
1
Fig.
Push the handle onto the flexible hose and lock it in
place.
Initial use
2
Fig.
Push the flexible hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
3*
Fig.
a) Telescopic tube without accessory connection:
Push the handle into the telescopic tube.
b) Telescopic tube with accessory connection:
Push the handle into the telescopic tube until it
locks into place.
4*
Fig.
a) Nozzle without accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle.
b) Nozzle with accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
5*
Fig.
Unlock the telescopic tube by moving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tele-
scopic tube has been completely pulled out.
* Dependent on model
43