RISCO Group VUpoint RVCM11W Guide D'installation page 21

Advanced Settings
For security reasons, measures have been taken to minimize the risks of hacking by
restricting access to the IP Camera. However, in some cases, it is necessary to modify the
default IP Camera settings according to requirement in the field. This is performed by
experienced installers with special permission to access the IP Camera settings.
To Access the IP Camera Settings
1. Click the "..." button below to
enable the UI/CGI option.
Figure 21 IP Camera Settings
The following screen appears.
Figure 22 Enable UI/CGI Option
2. Select the UI/CGI checkbox.
3. Click Save.
The installer is now provided with access to the Web interface of the IP Camera for a
duration of one hour. Open an Internet browser and enter the IP address of the camera.
By Default, the Username and Password for the IP Camera login is "admin" and
"_AdmiN_+ IP Camera MAC address" (for example, _AdmiN_AABBCCDDEEFF).
NOTE:
After one hour, access to the camera will be disabled.
19