RISCO Group VUpoint RVCM11W Guide D'installation page 14

4. Click the Network Cameras link in the left-hand column; the IP Camera List
page is displayed.
5. Click Add Camera; the Add Camera dialog box is displayed.
6. Select the RISCO P2P Camera type.
7. Define the following fields in the Add Camera dialog box.
Field Description
Label Enter a name for the camera
Partitions Select the partition(s) from the list of defined partitions
Type
Choose the RISCO P2P Camera type (for ONVIF or Generic camera type
settings, refer to the RISCO Cloud Installer Application Manual)
Figure 5 Control Panel Update Page
Figure 6 IP Cameras List
Figure 7 Add Camera
12