TrekStor SurfTab xiron 7.0 HD Mode D'emploi page 33

19) Rebooting the SurfTab into Recovery Mode /
Factory Settings
The "recovery-mode" makes it possible, amongst other things, to return
the device to factory settings, delete forgotten passwords or the SurfTab's
memory. In order to enter recovery mode, proceed as following:
a) Turn off your SurfTab (see 20).
b) Press the "Volume control +" button (6 H) and keep it pressed.
c) Simultaneously press the power button (6 G) and keep both buttons
pressed simultaneously for about 8 seconds.
d) Release the power button.
e) Another 8 seconds later you can release the "Volume Control +" button
as well.
f ) The TrekStor logo flashes briefly and the recovery mode menu
is displayed on the screen of the SurfTab.
g) Use the volume button to navigate through the menu, using the power
button to select an option.
h) To exit the recovery mode, use the volume button to select "
and press the power button. Your SurfTab now exits the recovery mode
and restarts.
Via "s "
i
+
Ettings
20) Turning off SurfTab
a) Press the on the on/off switch for about 2 - 4 seconds.
b) The following message appears: "d
to turn the SurfTab off.
"b & " you can also reset the SurfTab to factory settings.
ackuP rEsEt
o you Want to shut doWn
"
rEBoot systEM noW
?". Press "oK",
EN
33