Mio MiVue 338 Mode D'emploi page 9

1~2 minutes long. These video clips are temporary recording files until they are locked/saved
by pressing the Menu key
If continuous recording is ongoing but there is not enough space on your memory card, new
temporary video clips will replace the old ones.
To stop recording, press the OK/Record key
G-sensor event recording
If an event happens, such as sudden damage, high-speed driving, an overdone turn or an
accidental crash, the G sensor will prompt the recorder to lock and save the recording.
The locked/saved recordings will not be replaced by temporary video clips.
Manual event recording
In addition to automatic event recording prompted by the G sensor, you can also start and
save the recording manually.
Simply tap lightly on the recorder. The G sensor will prompt the recorder to lock and save the
recording.
The locked/saved recordings will not be replaced by temporary video clips.
Note: To change Camera settings, press the Menu key
Camera mode
Use the Power key to toggle to the Camera mode.
When ready, press the the OK/Record key
Note: To change Camera settings, press the Menu key
.
.
.
to take the photo.
.
en
9