Use, Storage & Maintenance Instructions - Teeter Better Back Instructions D'assemblage Et D'utilisation

Operating Controller
FOR LIGHT- HEAT TECHNOLOGY:
• Press the "heat" button to turn the Neck Arch Support heat lights on
and off.
FOR VIBRATION:
• Press the "power" button on the Controller to start the vibrating motors.
• Press the "function" button to select vibration modes: tapping, up &
down, wave, all motors, and random.
• The vibration area can be selected by pressing the buttons "neck", "upper
back", "lower back", "lumbar" and "thighs".
• Press the "timer" button to select the amount of vibration time.
• Press the "fast" or "slow" buttons to adjust the speed of the vibration
motors.
• Press the "high" or "low" buttons to adjust the desired intensity.
!
ALWAYS read, understand, and follow the instructions and warnings
associated with and accompanying any supplementary equipment,
such as the Teeter Inversion Table. Use on the inversion table will
affect the balance, causing the table to rotate faster. Adjust your user
settings per the Inversion Table Owner's Manual.
Maintenance
• Be sure to unplug the Vibration Cushion and allow it to cool prior to
cleaning. Using a soft, slightly damp sponge, wipe only the surface.
DO NOT allow the Vibration Cushion to contact or become immersed
in water or any other liquid. NEVER clean the Vibration Cushion with
brushes or abrasive cleaners, flammable fuels, glass/furniture polish or
paint thinner.
Storage
• Place the Vibration Cushion in its original box or in a cool, dry
place. Use caution when storing so as not to damage the internal
components. Take care to avoid contact with sharp or pointed objects
that might puncture the fabric surface.
• Do not wrap the power cord around the unit or attempt to hang the
Vibration Cushion by the Controller cord.
8
Use, Storage, & Maintenance
WARNING
FIGURE 11
*
*
*
*
TIMER
SPEED
INTENSITY
A symbol on the LCD
screen will flash as its
control key is activated.
LCD
POWER
HEAT
FUNCTION
POSITIONS
*