Troubleshooting - Renkforce B-400 Mode D'emploi

13. Troubleshooting

By purchasing this device, you have acquired a product designed to the state of the art and operationally
reliable. Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
No function after the device has been switched on:
• The mains plug is not plugged into the socket correctly.
• The mains socket is not supplied with current.
• The fuse has tripped. Replace it (see "Fuse Change"). Should the fuse trigger again, have the product
repaired in a specialised workshop.
There suddenly is no fog emission in operation anymore:
• The device is re-heating. Once the heating process is complete, the device will work again.
• The device no longer is connected to the voltage supply. Check for correct connection and voltage sup-
ply to the mains socket.
• The tank is empty. Please top up fog fluid.
The device produces fog in spite of deactivated fog operation or for a short time after deactivation/dis-
connection:
• It is not a defect. The remaining fog liquid in the still-hot fog exit opening (7) evaporates.
Repairs other than those described above must only be carried out by an authorised specialist.
28