Cleaning; Troubleshooting - Renkforce A-2001 Mode D'emploi

All manuals and user guides at all-guides.com
b) Cleaning
Disconnect the device from the power supply and leave it to cool down before cleaning.
The device is maintenance-free and you should therefore never open it. If you open it, the guarantee will
expire.
Only clean it with a soft, dry cloth or a brush only. Never use aggressive cleaning agents or chemical solu-
tions as the surface of the casing could be damaged.
The fog machine can be cleaned with a moist cloth on the outside. Never use aggressive cleaning agents,
chemical solutions or scouring agents as the paint coating could be damaged.
Avoid deposits and residue in the fog fluid channels by using a special fog machine cleaner. Observe the
instructions for cleaning liquid.

10. Troubleshooting

By purchasing this fog machine, you have acquired a product designed to the state of the art and opera-
tionally reliable.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
There suddenly is no fog anymore in operation:
• The device performs subsequent heating. Once the heating process is complete, the device will emit fog
again.
• The device no longer is connected to the voltage supply. Check for correct connection and voltage sup-
ply to the mains socket.
• The tank is empty; please refill it.
The device produces fog in spite of deactivated fog operation or for a short time after deactivation/dis-
connection:
• It is not a defect. The remaining fog liquid in the still-hot fog exit opening evaporates.
Repairs other than those described above must only be carried out by an authorised specialist.
28