Functions; Setting - Veripart VPKVC185 Mode D'emploi

FUNCTIONS

When the fridge freezer combination system is connected to the power supply
for the first time, all the icons on the display panel will be illuminated for 2
seconds. When all the doors are closed, the display will be extinguished
automatically if there is no key operation within 3 minutes. When the display
is off, it will light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and
will be illuminated on the display.
TEMP. SETTING
1. Fridge temperature setting
Press the 'Fridge' button.
Then, when the fridge temperature digits start flickering,
press the 'Fridge' key to adjust the temperature, then
finally press OK to set the temperature.
The fridge temperature setting cycles are as follows :
5°C > 6°C > 7 °C > 8°C > OFF > 2°C > 3°C > 4°C > 5°C
When OFF is illuminated and then confirmed, the fridge
will stop cooling.
！ ！
Warning!
• Take foods out of the fridge compartment before
setting this function.
2. Freezer temperature setting
Press the 'Freezer' button. Then, when the freezer temperature digits
begin flickering, press the 'Freezer' key to adjust the temperature, then
finally press OK to set the temperature.
The freezer temperature setting cycles are as follows:
18°C > 17°C > 16°C > 24°C > 23°C > -22°C > 21°C > 20°C >
19°C > 18°C
44
Fridge
Freezer
Function
OK