connection you are trying to use, and click Properties. Make sure that the
description in the terminal adapter box matches the description of the terminal
adapter you are using. If it does not match, select the proper terminal adapter
description.
My terminal adapter does not dial out or does not answer
incoming calls.
Possible solution:
You may have a bad phone connection to your terminal adapter. Use the phone
wire included in your terminal adapter box if possible. Also, check that the
software you are using is set up to use the proper Terminal Adapter.
Still Having Problems?
Refer to the Online Manual included on the Installation CD. The CD contains
more detailed troubleshooting information.
Call the Dealer Who Sold You this U.S. Robotics Product
The dealer may be able to troubleshoot the problem over the phone or may
request that you bring the product back to the store for service.
Call the U.S. Robotics' Technical Support Department
Technical questions about U.S. Robotics products can also be answered by
technical support specialists.
Call Technical Support: 0870 844 4546
Email Technical Support: emea_modemsupport@usr.com
Web Site: www.usr-emea.com
For current support contact information, go to the following web site:
http://www.usr.com/support/s-contact.asp
Regulator
Regulatory Information
Regulator
y Information
y Information
y Information
Regulator
Regulator
y Information
EU Declaration of Conformity
We declare under our sole responsibility that the Product: U.S. Robotics ISDN PCI Card TA
Model Number: 3409 (ST Interface)
To which this declaration relates, is in conformity with the following standards or other
normative documents:
• Council Directive 89/336/EEC - EMC Directive
EN55022: Class EN55024
• Council Directive 72/23/EEC - Low Voltage Directive
EN60950 1992: A1-A4
TS001 & AS/NZS3260
ETS 300 047 (08.92)
• Commission Decision 98/515/EC - Telecommunication Performance
CTR 3 (05/97) A1 (06/98)
TS031 (1997)
CE Compliance
This device complies with the requirements of European Directive 1995/5/EC.