Sawing - Husqvarna FS 700 EX Manuel D'utilisation

Operator's Manual FS 700EX
Turn on the water coolant so that sufficient cooling is
obtained and dust build-up is prevented.
Check that the water supply is ample and that the nozzles
are not clogged. Also check that the set screw is fitted in
the end of the blade spindle where no blade is fitted
.
Make sure that the saw blade rotates freely before starting
the machine.
Make sure that the machine's power cable and water
supply can not end up under the machine or are in the
way by using the hose holder.

Sawing

Activate the propulsion by moving the foot lever as
illustrated with your foot. The machine will not start to
move until the trolley feed lever is moved from the neutral
position.
English - 13