mysoda WOODY Mode D'emploi page 8

HOW TO MAKE SPARKLING WATER
1. Fill the water bottle with cold water up to the
fill line.
3. Push the carbonation button 2–3 times,
stop when you hear a hissing sound.
5. Release the bottle by turning it by one
quarter clockwise.
NOTE: Only use compatible CO2 cylinders and Mysoda water bottles. Never carbonate if
the bottle is empty, not fully inserted with water or if water is above the fill line.
8
2
2. To insert the water bottle, make sure that the device
is in a fully upright position and the bottle quick-lock is
angled forward. Then insert the bottle in quick-lock and
turn one quarter anti-clockwise to lock. Push the bottle
towards the device to a vertical position.
4. Pull the bottle towards yourself to release pressure
inside the bottle.
6. Enjoy your carbonated water or add desired
flavour.
1