Publicité
Les langues disponibles
Les langues disponibles
functiOns Of the ec rADiO trAnsMitter
Button o
Button I
Button A
Button C
Button B
Button d
Button A, C Button o
Button B, D Button I
functiOn 1
Button operation
Press Button (Mode)
Switching function (Mode)
Mode 1 - 0
1
Button o = oFF / Button I = oN
2
Button I = oFF / Button o = oN
Button o = oFF (3 min time-delayed)
3
Button I = oN
Button o = oFF (5 min time-delayed)
4
Button I = oN
Button o = oFF (10 min time-delayed)
5
Button I = oN
Button o = oFF (30 min time-delayed)
6
Button I = oN
7
Button O = oFF (3 min time-delayed)
8
Button O = oFF (5 min time-delayed)
9
Button o = oFF (10 min time-delayed)
0
Button o = oFF (30 min time-delayed)
notes:
– Mode 3-6 is suitable for movement sensors.
(e.g. Sensolux presence sensor)
– Mode 7-0 is suitable for time-delayed power deactivation
of sockets. A different radio transmitted with appropriate
functionality is required to switch on!
functiOn 2
one-button operation
Press Button (Mode)
Switch
Mode 1 - 8
1
Button o is activated
2
Button I is activated
3
Button o + I activated
4
Switch off with button o
5
Switch off with button I
6
Switch off with button o or button I
7
Switch off with button o, change over with button I
8
Switch off with button I, change over with button o
Invalid mode (not assigned!)
9 -> 0
functiOn 3
Button
Press Button (Mode)
Switch On
Release Button (Mode)
Switch off
Mode 1 - 3
1
Button o is activated
2
Button I is activated
Button o + I activated
3
Pulse button
Press Button (Mode)
Turn-on pulse 5s
Release Button (Mode)
Switch off
Mode 4 - 6
4
Button o is activated
5
Button I is activated
6
Button o + I activated
454 FU-SPV 4REG (Rev03-190408)
Hotel card function
Press Button o/I
Switch On
Release Button o/I
Turn off after running time (Mode)
Mode 7 - 0
7
1 min running time
8
3 min running time
9
5 min running time
0
10 min running time
functiOn 4
Stairwell light with turn-off warning
Switch on with running time
Press Button o/I briefly
(Mode)
Press Button o/I long
Switch on for 4 hours
Mode 1 - 5
1
2 min running time
2
5 min running time
3
10 min running time
4
30 min running time
60 min running time
5
note: When the running time is over, the lighting is switched
off for 2s (turn-off warning), then switched back on again
for 30s.
time switch
Press Button o
Switch off
Press Button I
Switch on with running time (Mode)
Mode 6 - 0
6
2 min running time
7
5 min running time
8
10 min running time
9
30 min running time
0
60 min running time
functiOn 5
fan control
Press Button o
Turn off after running time (Mode)
Press Button I
Delayed activation (3 min)
Mode 1 - 6
1
2 min running time
2
6 min running time
3
10 min running time
4
15 min running time
5
20 min running time
6
30 min running time
7 -> 0
Invalid mode (not assigned!)
functiOn 6
Light scene
Press button o briefly
Switch on light scene A/C
Press button o for a long time Store light scene A/C
Press button I briefly
Switch on light scene B/D
Press button I for a long time
Store light scene B/D
Mode 1 - 2
Button o = light scene A
1
Button I = light scene B
Button o = light scene C
2
Button I = light scene D
3 -> 0
Invalid mode (not assigned!)
Application example: Light scene
An additional radio transmitter is necessary to memorise
and activate a light scene. In the case of a system with
several receivers, each receiver must be programmed, and
the radio transmitter assigned!
1. Programme receiver
– Set function 6 and the desired mode.
– Assign transmitter.
2. store light scene (A-D)
– Switch on the required light scene (receivers).
– Press button I or o of the transmitter for longer than 2s.
The lighting goes off and on as confirmation.
3. select light scene (A-D)
Briefly press I or o on the transmitter.
winDOw cOntAct/hAnDLe functiOns
PehA window contact
(450 FU FK)
max. 5mm
Magnet
notes:
– The assignment and programming of a window contact
is also possible before the installation!
– In learn mode, the window contact is assigned or
deleted with the programming button.
– In learn mode, the window handle is assigned or deleted
through opening or closing.
functiOn 7
window contact, window handle On/Off
Window contact or handle – opened
Switch on
All window contacts and handles – closed
Switch off
Mode 1 - 2
1
Window contact function
2
Window handle function
window contact, window handle Off/On
Window contact or handle – opened
Switch off
All window contacts and handles – closed
Switch on
Mode 3 - 4
3
Window contact function
4
Window handle function
window contact, window handle acknowledgement
Window contact or handle open
Acknowledgement
(Status)
Window contacts and handles closed
Mode 5 - 7
5
Window contact function
6
Window handle function
7
Visualisation function
8 -> 0
Invalid mode (not assigned!)
note:
The PC display or bidirectional devices (e.g. handheld trans-
mitters) must be assigned to mode 7. It is possible to show
whether a window is open or closed, for example. In modes
5 and 6, the associated outputs are not switched directly in
the event of acknowledgement. Only output status notifi-
cation takes place. The status notification can be displayed
visually on the PC display or by bidirectional devices.
functiOns sensOLux PM
Lrn Button
test Button
Light measurement
LeD test
PehA sensOLux
presence sensor (PM)
(482 FU -BM DE)
The presence sensor registers the presence (movement) of
persons and the light value (IR component) of the ambient
light. The registered values are sent to the switching module
for evaluation (radio signal).
Light value measurement:
dark
Light value 1
Light value 2
Light value 3
light
notes:
– A presence sensor can be assigned even before it is
installed!
– In learn mode, the presence sensor is assigned or
deleted with the LRN button.
– If the assigned output is switched by another radio
transmitter (e.g. wall transmitter), the Sensolux PM only
re-activates after it has detected no movement for
approx. 2 min.
functiOn 8
Light-dependent control (fully automatic)
Light-dependent control
Turn off after running time
(fully automatic)
(Mode)
Movement detected and
Switch on
light value not exceeded
Mode 1 - 9
1
Light value 1 (3 min running time)
2
Light value 1 (5 min running time)
3
Light value 1 (15 min running time)
4
Light value 2 (3 min running time)
5
Light value 2 (5 min running time)
6
Light value 2 (15 min running time)
7
Light value 3 (3 min running time)
8
Light value 3 (5 min running time)
9
Light value 3 (15 min running time)
0
Invalid mode (not assigned!)
functiOn 9
Light-dependent control (semi-automatic)
No movement detected or light
Turn off after running
value exceeded
time (Mode)
Mode 1 - 9
1
Light value 1 (3 min running time)
2
Light value 1 (5 min running time)
3
Light value 1 (15 min running time)
4
Light value 2 (3 min running time)
5
Light value 2 (5 min running time)
6
Light value 2 (15 min running time)
7
Light value 3 (3 min running time)
8
Light value 3 (5 min running time)
9
Light value 3 (15 min running time)
0
Invalid mode (not assigned!)
gb - 3
Publicité
