Service Parameters - Seltron PROMATIC CMP25-2 Mode D'emploi

SERVICE PARAMETERS

Service parameters are classified into groups S1 - basic settings, S2 - settings for heating
circuit, S3 - settings for heat source.
The contents of service parameters are displayed as follows:
Parameter index
Setting range
Default
parameter
value
The desired parameter is changed in the same way as the basic parameters P.
Service parameters are locked and must be unlocked before editing.
Decrease value
Previous position
The default unlock code for service parameters is 0001.
Service settings manual
Cancel
unlocking
32
- Parameter is locked
Current parameter value
Parameter description
Navigation buttons
Increase value
Next position
Unlock
confirmation