Seltron PROMATIC CMP25-2 Mode D'emploi page 10

STEP 3 - LANGUAGE SELECTION
Press icon which indicates your language.
After selecting proper language, press button
STEP 4 - HYDRAULIC SCHEME
OR
Select scheme for controller operation.
Confirm your selection with button
STEP 5 - HEAT CURVE STEEPNESS
Selected hydraulic scheme, screen orientation direction, rotation direction
and language can be at any time changed in service settings or with reset of
controller!
RESET
Switch off power supply of the controller. Hold button
power supply. Controller resets and runs initial setup.
User manual
to confirm your selection.
.
Press buttons and
steepness. Confirm your selection with button
Heat curve steepness is detailed described on pages 30
and 31.
10
to set requested heat curve
and switch on
.