Data Overview - Seltron PROMATIC CMP25-2 Mode D'emploi

Display settings
There are four settings available:
Time of active illumination and menu-autoexit
Intensity of active illumination
Intensity of inactive illumination
Contrast
Change each particular setting with buttons
the previous screen by pressing button

DATA OVERVIEW

In the Menu there are icons to access the following information about controller operati-
on:
DIAGRAMS OF MEASURED TEMPERATURES FOR LAST WEEK
Graphical representation of temperatures for each sensor, by days.
Temperatures are recorded for the last week of operation.
DIAGRAMS OF MEASURED TEMPERATURES FOR LAST DAY
Detailed graphical representation of temperatures of sensors for current day. The frequency of
records is set by parameter P1.7. Such temperature display is used primarily for the analysis of
the heating system at startup, service or in case of failure.
SPECIAL SERVICE DATA.
Diagnostic data for service department.
Between the graphs of individual sensors you can move with the key
Use keys
and
.
and to move between days.
27
. Confirm your setting and exit to
.
User manual