Axis M3014 Guide D'installation page 11

7. Attach the cable to the network connector (supports PoE class 1) in the camera. If PoE
is not supported by the network switch, use the supplied PoE midspan/power injector
to connect power to the AXIS M3014 Network Camera.
8. Check that the indicator LEDs indicate the correct conditions. For further details, see
LED Indicators on page 8 .
9. Align the camera arrow with the camera module holder arrow and insert the camera into
the metal camera module holder.
10. Turn the camera so that the camera arrow points to Viewing area marked on the rim of
the metal camera module holder.
1
Camera module holder arrow
2
Viewing area
3
Camera arrow
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
The product can be used with most operating systems and browsers. We recommend the following
browsers:
• Internet Explorer
®
• Safari with OS X
TM
• Chrome or Firefox
For more information about using the product, see the User Manual available at www.axis.com
AXIS M3014 Network Camera
® ®
with Windows
®
®
with other operating systems.
11