Lincar Monella Instructions D'utilisation Et D'entretien page 61

MENU02 (crono setting)
Within this Menu you can set up the automatic cycles of switching ON/OFF you desire to
utilize. There are 3 different modalities you can utilize, even contemporaneously, but pay
attention to not overlap the programmations.
PROGRAM DAY. The programmations inserted in this section will be repeated every day of
the week in the same way (max 2 ON/OFF cycles)
PROGRAM WEEK. With the programmations inserted in this section you can effect different
ON/OFF during the days of the week (max 4 ON/OFF cycles)
PROGRAM WEEK-END. The programmations inserted in this section will be repeated
exclusively on Saturday and Sunday (max 2 ON/OFF cycles).
MENU 03 (select language)
Within this Menu you can change the language utilized by the control panel. There are 4
possibilities: ItalianEnglish German French
MENU 04 (status stand-by)
The appliance is preset to work in 2 (two) different modalities
st
1 Modality, -STAND-BY OFF- as prearranged by the factory.
Once the appliance has reached one of the selected temperature (room or boiler), it reduces
the power to the minimum and the display signals "WORK MODULAT". The appliance
remains at the minimum until one of the temperatures goes under the selected value. In case o
the Mod. 940 (including kit for domestic water production) is working in this modality, it is
always ready for the production of domestic water.
nd
2 Modality, -STAND-BY ON-.
Once the appliance has reached one of the selected temperature (room or boiler), it reduces
the power to the minimum and the display signals "WORK MODULAT".
The appliance continues working at the minimum, if at the minimum power, one of the
selected temperatures (room or boiler) is exceeded by some degrees, starts the cycle of
extinction and at the end of this cycle the display signals "STAND-BY". In case the Mod.
940 (including kit for domestic water production) is working in this modality, it is not
possible to produce domestic water until the appliance will be working again.
MENU 05 (status buzzer)
Within this Menu you can select the modality of buzzer.
OFF, no sounds.
ON ALWAYS, sound in case of alarm
MENU 06 (load initial)
Within this Menu you can set the continuous fuel load, this operation can only be effected
when the appliance on the display is evidencing "OFF". This menu is utilized to fill the screw
feeder when the appliance is new or in case of emptying of the pellet container.
MENU 07 (status appliance)
Within this Menu you can find some information's about the working of the appliance.
61/112
IT-GB-FR mod. 940-940/SA