Beta 3027 100 Mode D'emploi page 11

EN
INSTRUCTIONS FOR USE
PRESS DESCRIPTION
The motorized press has been designed to press parts in workshops and carry out the operations
described in "Purpose of Use".
The press is composed of the following parts:
1) box-type sheet steel frame
2) sturdy steel bed
3) bed positioning pins
4) hydraulic cylinder
5) two supporting prisms
6) one control unit start/shutdown panel
7) hydraulic control unit (see diagram Fig. 5) of the cylinder, comprising the following:
a. electric motor
b. one low-pressure and high-delivery gear pump
c. one high-pressure and low-delivery piston pump
d. one oil tank
e. one distributor with maintained-action lever
f. two pipes for connecting control unit - cylinders
8) gauge
Fig 2
Supplied with:
9) one chain
10) one eyebolt
for vertical displacement of the pallet:
Fig 3
11